Explosion proof hot air fan is a type of industrial hot air fan, which is a common equipment in industrial production. Compared with general hot air fans, it has a higher safety and explosion-proof coefficient, and is suitable for industrial enterprises with extremely high safety requirements. Nowadays, whether in life or production, energy-saving and emission reduction are advocated. So how can explosion-proof hot air fans achieve energy-saving and emission reduction? Below, we will explain some relevant energy-saving measures.
During the use of explosion-proof hot air fans, attention should be paid not to adjust the temperature too high. Excessive temperature not only wastes resources, but may also cause some fire accidents. If the temperature exceeds the required temperature for production, it may also affect the quality of the product, which is not worth the loss.
The ventilation switch of the explosion-proof hot air fan cannot be kept in a normally open state for a long time, which not only increases energy consumption but also makes it difficult to achieve the temperature standard required for production. When starting up, set it to a high temperature state, which can reach the specified temperature requirements faster. When the temperature is suitable, adjust it to a stroke, which can reduce some energy consumption and also reduce the generation of noise,.
When installing hot air fan equipment, it is necessary to pay attention to the inlet and outlet of the air, and there must be no obstructions at the position of the outlet. Even if there are, it is necessary to maintain a relatively safe distance and try not to place anything. This can not only improve the safety of equipment use, but also increase the air circulation area of the inlet and outlet, accelerate the heating speed, and reduce energy consumption.
When manufacturing enterprises choose explosion-proof hot air fans, they need to choose appropriate specifications of equipment based on the size of the production workshop, or place the equipment in a workshop with an appropriate area. If the workshop area is too large, then
It will reduce the heating effect and increase energy loss. Generally speaking, each device will have a recommended area, and try not to exceed the recommended area size. Occasional cleaning personnel need to regularly clean the dust on the heat dissipation fins of explosion-proof hot air fan equipment, and maintain the cleanliness of the inlet and outlet of the air. This is because excessive dust on the heat dissipation tube of the heat sink will affect the circulation of air, affect the inlet and outlet air, and inevitably increase energy consumption.
The above is an introduction to energy-saving measures for explosion-proof hot air fans, which is very simple and convenient. Pay more attention to these details in daily life, which can save a lot of energy expenses for enterprises and make a contribution to the energy conservation and environmental protection work of the whole society.